emc_config.tar.gz

Configuration files for EMC2 used to run the CNC CO2 laser system described here and here.

Download the code package here.

Contents of the code package
emc_config/
emc_config/.cvsignore
emc_config/.scope.cfg
emc_config/.tmp_rhino_parse
emc_config/autosave.halscope
emc_config/emc.nml
emc_config/HOSTM54E.PIN
emc_config/laser.ini
emc_config/laser_vcp.hal
emc_config/laser_vcp.xml
emc_config/M102.README
emc_config/M102.save
emc_config/mesa5i20-1.sym
emc_config/nc_files/
emc_config/nc_files/array.ngc
emc_config/nc_files/M102
emc_config/nc_files/M102~
emc_config/nc_files/M103
emc_config/nc_files/oxygen_stamp
emc_config/nc_files/ping.ngc
emc_config/nc_files/ping.ngc~
emc_config/nc_files/thing.ngc
emc_config/other_io.hal
emc_config/oxygen_stamp
emc_config/shutdown.hal
emc_config/univstep.tbl
emc_config/univstep.var
emc_config/univstep.var.bak
emc_config/univstep_io.hal
emc_config/univstep_load.hal
emc_config/univstep_motion.hal
emc_config/univstep_servo.hal